Connecting jumper cables

1. Fold open the cover of the BMW starting-aid terminal. To do so, pull the tab.
2. Attach one terminal clamp of the positive jumper cable to the positive terminal of the battery, or to the corresponding starting aid terminal of the vehicle providing assistance.
3. Attach the other end of the cable to the positive terminal of the battery, or to the corresponding starting aid terminal of the vehicle to be started.
4. Attach one terminal clamp of the negative jumper cable to the negative terminal of the battery, or to the corresponding engine or body ground of the vehicle providing assistance.
5. Attach the other end of the cable to the negative terminal of the battery, or to the corresponding engine or body ground of the vehicle to be started.Starting the engine

    See also:

    Transporting the vehicle
    Note Your vehicle is not permitted to be towed. Therefore, contact a service center in the event of a breakdown. Do not have the vehicle towed Have your vehicle transported on a loading plat ...

    Automatic soft closing
    To close the tailgate fully, press down lightly only. It is closed automatically. ...

    The concept
    The central locking system becomes active when the driver's door is closed. The system simultaneously engages and releases the locks on the following: ▷ Doors. ▷ Trunk lid. ▷ ...