Caring for special components
Use wheel cleaner, particularly during the winter months. Do not use aggressive, acidic, strongly alkaline or abrasive cleaners, or steam jets above 140 ℉/60 ℃; follow the manufacturer's instructions.
Carefully clean components such as the radiator grille or door handles with an ample supply of water, possibly with shampoo added, particularly when they have been exposed to road salt.
Aluminum running boards
A rust film on the aluminum running boards can be removed with a special cleaning agent.
Aside from water, treat only with rubber cleansers.
When cleaning rubber seals, do not use any silicon- containing car care products in order to avoid damage or reduced noise damping.
Fine wood parts
Clean fine wood facing and fine wood components only with a moist rag. Then dry with a soft cloth.
▷ Imitation leather surfaces.
▷ Lamp lenses.
▷ Instrument cluster cover.
▷ Matte black spray-coated components.
Clean with a microfiber cloth.
Moisten the cloth lightly and use plastic cleanser, if necessary.
Do not soak the headliner.
Do not use cleansers that contain alcohol
Do not use cleansers that contain alcohol or solvents, such as lacquer thinners, heavy-duty grease removers, fuel, or such; this could lead to surface damage.◀
Dirty belt straps impede the reeling action and thus have a negative impact on safety.
No chemical cleaning
Do not clean chemically; this can destroy the webbing.◀ Use only a mild soapy solution, with the safety belts clipped into their buckles.
Do not allow the reels to retract the safety belts until they are dry.
Carpets and floor mats
No objects in the area around the pedals
Keep floor mats, carpets, and any other objects out of the area of motion of the pedals; otherwise, the function of the pedals could be impeded while driving Do not place additional floor mats over existing mats or other objects.
Only use floor mats that have been approved for the vehicle and can be properly fixed in place.
Ensure that the floor mats are securely fastened again when they are returned after being removed, such as for cleaning.◀
Floor mats can be removed from the passenger compartment for cleaning.
When returning the floor mats, secure them again to prevent slipping.
If the floor carpets are very dirty, clean with a microfiber cloth and water or a textile cleaner. To prevent matting of the carpet, rub back and forth in the direction of travel only.
To clean sensors or cameras, use a cloth moistened with a small amount of glass cleaner.
Use a microfiber cloth to clean the Control Display or instrument cluster, for example.
Do not use chemical or household cleansers.
Keep all fluids and moisture away from the unit.
Otherwise, they could affect or damage surfaces or electrical components.
Avoid pressing too hard when cleaning and do not use abrasive materials; otherwise, damage can result.◀
General information The route calculated can be influenced by selecting certain criteria. The route criteria can be changed when the destination is entered and during destination guidan ...
The concept This system projects important information into the driver's field of vision, e.g., the speed. In this way, the driver can get information without averting his or her eyes from the ...
Actions in the event of a flat tire
Normal tires 1. Identify the damaged tire. Do this by checking the air pressure in all four tires. If the tire inflation pressure in all four tires is correct, the Tire Pressure Monitor may not ...