Setting manually

Setting manually
Setting manually

Pull the button. The parking brake is set.

red. The The indicator lamp lights up in red. The parking brake is set.

modelsTo set the parking brake, the remote control Indicator lamp in Canadian modelsTo set the parking brake, the remote control does not need to be in the ignition lock.

the vehicle as required Set the parking brake and further secure the vehicle as required
Set the parking brake firmly when parking; otherwise, the vehicle could roll. On steep upward and downward inclines, further secure the vehicle, for example, by turning the steering wheel in the direction of the curb.◀

While driving

Use while driving:

Pull the switch and hold it. The vehicle brakes hard while the button is being pulled.

red, a signal The indicator lamp lights up in red, a signal sounds and the brake lamps light up.

models. Indicator lamp in Canadian models.

If the vehicle is braked to a speed of approx.

2 mph/3 km/h, the parking brake remains set.

    See also:

    Exterior mirrors
    At a glance At a glance 1 Adjusting 2 Left/right, Automatic Curb Monitor 3 Fold in and out General information The mirror on the passenger side is more curved than the driver's side mirror. ...

    Switching off automatically
    The system switches off and the LED goes out: After approx. 33 ft/10 m when driving forward. Above approx. 9 mph/15 km/h when driving forward. Switch on the system again if necessary. ...

    Energy recovery
    The energy of motion of the vehicle is converted to electrical energy while coasting. The vehicle battery is partially charged and fuel consumption can be lowered. ...